Gw-25/Gw-45 Main Features - Polycom MGC Administrator Administrator's Manual

GW-25/GW-45 Main Features

The GW-25/GW-45, main features are:
The gateway may be configured as standalone or in a shared resource
•
configuration with the MCU
Scale up to 48 Gateway sessions per gateway
•
Connections speed up to E1 (1920 Kbps)
•
• Can be configured with ISDN/IP network interface supported (ISDN E1/
T1 up to 1920 Kbps and Ethernet 10/100)
• Supports ITU video conferencing standards for video and audio
Can provide a firewall gateway solution
•
Can be monitored via the network using SNMP
•
Supports Direct Inward Dialing (DID), routing H.320 incoming calls to
•
H.323 endpoints
Video Transcoding (when needed, requires additional hardware)
•
BONDING standard
•
• Once configured, the Gateway works seamlessly without operator
intervention
• Enables the operator to view the list of On Going Gateway sessions and
assist participants if required
H.239/People+Content support
•
An MCU that is configured as a gateway can forward DTMF tones. The
DTMF support in Gateway Sessions is enabled in the system.cfg file in
the GENERAL SECTION, by setting the ENABLE_DTMF_VIA_GW flag
to YES.
MGC Administrator's Guide
7-3