Polycom MGC Administrator Administrator's Manual page 548

Appendix D: The Falcon Diagnostic Tool
D-6
Table D-1: Diagnostic Tests (Continued)
Card Unit
Audio+ CM
Proc
Test Description
PCI Scans the PCI to ensure that its
components are working
properly.
TDM Creates a loop between the DSP
through the backplane and the
QIFI then back to the DSP via the
time slot switch to check data
transfer through the loop.
QIFI Checks the watchdog.
Memory Checks buses' data and
addresses.
Checks memory integrity and
capacity.
Clock Checks the frequency rate of the
processor.
Memory Checks buses' data and
addresses.
Checks memory integrity and
capacity.
Checks burst and data bus
energy changes.