Polycom MGC Administrator Administrator's Manual page 37

Table 2-2: MCU GMT Time Options
Field
MCU GMT Offset
Get Oper
Time&GMT
Get Oper Time
Use NTP Server
Operator Local
Time and Date
Operator GMT
Offset
To set the time on the MCU using an NTP Server:
1. In the MCU GMT Offset box, enter the time difference between the MCU
Local Time and MCU GMT Time.
2. Select the Use NTP Server check box, and enter the IP address of the
NTP server.
3. Click OK.
NTP Server synchronization may take up to an hour. All time-related
settings, such as the scheduled Starting Time of Reservations, are
adjusted.
Description
Displays the currently defined time zone difference.
To manually modify the GMT Offset, click on the
scroll arrows to change the value, or enter the new
value.
Note: GMT offset can be set in minutes, for example:
5 hours and 45 minutes.
Click this button to automatically update the MCU's
Date, Time and time zone to match the MGC
Manager's date, time and time zone settings.
Click this button to automatically update the MCU's
Time and Date to match the MGC Manager's time
and date settings (without GMT offset).
This field is only applicable to XPEK systems.
Select this check box to synchronize the time with an
NTP server. Enter the IP address of the required
NTP server.
Displays the local date and time as set in the MGC
Manager (this time is taken from the Windows
operating system).
The time zone difference as set in the MGC Manager
(this time is taken from the Windows operating
system).
MGC Administrator's Guide
2-19