Defining Gateway Session Profiles - Polycom MGC Administrator Administrator's Manual

Defining Gateway Session Profiles

Session Profiles define the call parameters. Session Profiles from H.323 to
H.320/H.323 calls are also used to indicate the calling mode. The call
parameters definition is the same for both H.323 and H.320: Line rate,
Restricted/Non-Restricted, Audio Only/Video and Transcoding Mode. The
difference between H.323 and H.320 is the Network Service to handle the
call.
There are two main types of Session Profiles:
• To H.320 Session Profile
To H.323 Session Profile
•
To define a To H.320 Session Profile:
1. Double-click the Gateway Configuration icon or click the Plus [+] icon
next to the Gateway Configuration icon to list its options.
2. Double-click the Session Profiles icon or click the Plus [+] icon next to
the Session Profiles icon to list its options.
3. Right-click the To H.320 Session Profile and then click New Session
Profile to define a new Session Profile for H.320 destination endpoints.
MGC Administrator's Guide
7-43