Polycom MGC Administrator Administrator's Manual page 348

Chapter 5 - MCU System Management
5-112
To automatically create a trace-capture file when there is a problem with
the IP card:
The automatic creation of the IP trace-capture file is controlled by a flag in
the "system.cfg" in the CARDS section: AUTO_IP_CARD_MONITOR.
For details of flag modification in the "system.cfg" see "Edit "system.cfg"" on
page 5-60.
This flag may be set to one of the following options:
NO (no automatic monitoring – only manual monitoring is available)
•
UNIT (traces will be automatically saved for each unit failure)
•
CARD (traces will be automatically saved for each card failure)
•
If Unit or Card are selected, a file containing the trace information for each
failure will be created using the name format crdmn_nn.txt, where nn is a
number between 00 and 19. The files are created sequentially, cyclically,
th
when the 20 file overwrites the first file and so on. Recommended mode is
NO (manual card monitor).
The IP card diagnostic file stored on the system saves the following traces to
the diagnostic file:
• Messages between tasks
• Tasks error messages