Polycom MGC Administrator Administrator's Manual page 365

Text: mpl
•
Board ID number (2 digits)
•
Unit ID number (1 digit)
•
A serial number between 0 and 99, ascending sequentially (2 digits)
•
For example, a file could be named: mpl04203 where 04 is the Board ID
number, 2 is the Unit ID number and 03 is the serial number between 0 and
99.
Manual creation of the MUX+ logger files:
In the IP Terminal window, type the command:
mp_logger <board_id> <unit_id>
Where <board_id> is the MUX+ board slot number (in the MGC 25, the
"logical" slot number as appears in the MGC Manager) and <unit_id> is the
mapped unit ID (0 for Card Manager).
For example, type mp_logger 3 2.
The file is stored in the MCU under the directory 7.256\mcu\muxp_log\. This
folder is automatically created by the system if it does not exist on the MCU.
MGC Administrator's Guide
5-129