Polycom MGC Administrator Administrator's Manual page 508

Appendix A: Faults
A-12
Table A-6: General Fault Descriptions (Continued)
Code
_ _ _
NO AUDIO MESSAGE
CONFIGURATION
_ _
NO CLOCK SOURCE
_ _ _
NO MUSIC IN
CONFIGURATION
_
PASSWORDS CONFLICT
_ _
PLEASE SEE
pscnflct_log_
_ _
FILE FOR DETAILS
_ _
POWER SUPPLY
FAILURE
_ _ _
RESET MCU BY
OPERATOR
_ _
SINGLE CLOCK SOURCE
Level Description
_ major Occurs when the MESSAGE flag in the
IN
system.cfg file, ATTENDED section is
configured to YES, but there is no
suitable hardware in the system.
major This error usually follows a red, blue or
yellow alarm. If the MCU fails to
identify the PRI line it is unable to
synchronize itself by the PBX.
major Occurs when the MUSIC flag in the
system.cfg file, ATTENDED section is
configured to YES, but there is no
suitable hardware in the system.
__ startup The password assigned to a
conference or reservation loaded from
a previous version is not valid in the
current version. For details see the
pscnflct.log file in the MCU root
directory.
Applicable to MGC-25 only.
The power supply failed.
minor The MCU was reset by the MGC
Manager from the Reset MCU sub-
menu.
minor Only one span was able to synchronize
itself with the PBX. The system will
continue to function normally but there
will be no backup clock source. If there
are more than one net (T1 or E1) cards
connected to the PBX, this may
indicate a problem with the connection
to the PBX.