Viewing The Ip/Ip+ Card Properties - Polycom MGC Administrator Administrator's Manual

Chapter 4 - MCU Card Management

Viewing the IP/IP+ Card Properties

Table 4-5: IP Card Types
IP Card Name
MG323
IP24
IP48
4-16
Table 4-4: Card Settings-Net-8 Network Parameters Options (Continued)
Field
PRI Software
Version
Stick Software
Version
The IP/IP+ card properties enable you to view additional information about
the IP network, the Network Service assigned to this card, the card details,
such as, the card type, hardware version, the MCU slot number, the card
status, and the conferences that are handled by the card. The IP card units
interface between the IP network and the MCU. There are several types of IP
cards: standard IP (MG323) and IP+ cards.
The IP cards can be of one of the following combinations:
Hardware version 1.24/1.41 with 8 MB memory and 12 port capacity
•
• Hardware version 2.21 with 16 MB memory and 24 port capacity
The IP+ cards are available in three port sub-assemblies: IP+12/IP+24/IP+48,
and are associated with version 4.23 and higher.
For conferences that include SIP defined participants, IP+ cards from version
4.23 or higher are required. For H.323-only conferences, IP (12 or 24) cards
are sufficient.
The following table lists the main differences between the IP card types.
HW Version SIP Support
1.24/1.41
2.21
4.23> 4.41
Description
Displays the version of the PRI software.
Displays the version of the Stick software.
Number of
Units
– 3
– 3
+ 3
VOIP Call Encryption
Capacity
12 No
24 No
96