Assigning The Isdn Network Service To The Net-2/Net-4/Net-8; Card - Polycom MGC Administrator Administrator's Manual

Assigning the ISDN Network Service to the Net-2/Net-4/Net-8

Card

In order to connect the MCU to the ISDN network switch, you need to assign
the ISDN Network Service to the appropriate span of the Net-2/Net-4/Net-8
Network Interface module. In addition, you may define which span in the
network interface card will be used as the primary clock and which one as the
backup clock to synchronize with the network clock.
To assign the ISDN Network Service to the Net-2/Net-4/Net-8 Network
Interface module:
1. Expand the MCU tree.
2. Expand the MCU Configuration tree.
3. Expand the Cards tree.
The Cards list is displayed below the Cards icon.
MGC Administrator's Guide
3-35