Enterasys Matrix 2G4072-52 Configuration Manual page 331

violations
port-string
Command Defaults
•
•
Command Type
Switch command.
Command Mode
Read-Only.
Examples
This example shows how to display the global status of the link trap detection function:
Matrix(rw)->show linkflap globalstate
Linkflap feature globally disabled
This example shows how to display ports disabled by link flap detection due to a violation:
Matrix(rw)->show linkflap downports
Ports currently held DOWN for Linkflap violations:
None.
This example shows how to display the link flap parameters table:
Matrix(rw)->show linkflap parameters
Linkflap Port Settable Parameter Table (X means error occurred)
Port
--------
ge.1.1
ge.1.2
ge.1.3
Displays the number of link flap violations since the last
reset.
(Optional) Displays information for specific port(s). For a
detailed description of possible port-string values, refer to
Section
If not specified, information about all link flap detection settings will be
displayed.
If port-string is not specified, information for all ports will be displayed.
LF Status
---------
disabled
enabled
disabled
Matrix DFE-Platinum and Diamond Series Configuration Guide
Configuring Link Traps and Link Flap Detection
4.1.1.
Actions Threshold
------- ----------
....... 10
D..S..T 3
...S..T 10
Port Configuration Command Set
Interval Downtime
---------- ----------
5 300
5 300
5 300
4-71