Enterasys Matrix 2G4072-52 Configuration Manual page 377

asyspri asyspri
aadminstate
lacpactive |
lacptimeout |
lacpagg | lacpsync |
lacpcollect |
lacpdist | lacpdef |
lacpexpire
padminsyspri
padminsyspri
padminsysid
padminsysid
padminkey
padminkey
padminportpri
padminportpri
padminport
padminport
Matrix DFE-Platinum and Diamond Series Configuration Guide
Sets the port's actor system priority. The LACP
implementation on the Matrix Series device uses this
value to determine aggregation precedence when there
are two devices competing for the same aggregator. Valid
values are 0 - 65535, with higher precedence given to
lower values.
NOTE: Only one LACP system priority can
be set on a Matrix Series device, using either
this command, or the set lacp asyspri
command
Sets the port's actor LACP administrative state to allow
for:
•
lacpactive - Transmitting LACP PDUs.
•
lacptimeout - Transmitting LACP PDUs every 1 sec.
vs 30 sec. (default).
•
lacpagg - Aggregation on this port.
•
lacpsync - Transition to synchronization state.
•
lacpcollect - Transition to collection state.
•
lacpdist - Transition to distribution state.
•
lacpdef - Transition to defaulted state.
•
lacpexpire - Transition to expired state.
Sets a default value to use as the port's partner priority.
Valid values are 0 - 65535, with lower values given
higher priority.
Sets a default value to use as the port's partner system ID.
This is a MAC address.
Sets a default value to use as the port's partner admin
key. Only ports with matching admin keys are allowed to
aggregate. Valid values are 1 - 65535.
Sets a default value to use as the port's partner port
priority. Valid values are 0 - 65535, with lower values
given higher priority.
Sets a default value to use as the port's partner admin
value. Valid values are 1 - 65535.
Configuring Link Aggregation
(Section 4.5.4.4).
Configuring LACP
4-117