Show Ipv6 Netstat - Enterasys SecureStack B3 Configuration Manual

Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows example output of this command.
B3(su)->show ipv6 neighbors
IPv6 Address
--------------------------------------- ----------------- ----- -------
2001:db8:1234:6666::2310:3

show ipv6 netstat

Use this command to display IPv6 netstat information.
Syntax
show ipv6 netstat
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows the output of this command.
B3(su)->show ipv6 netstat
Prot Local
Foreign Address
---- -------------------------------------------- -----------
TCP 3333::211:88FF:FE59:4424.22
2020::D480:1384:F58C:B114.1049
TCP 3333::211:88FF:FE59:4424.443
2020::D480:1384:F58C:B114.1056
TCP ::.23
::.*
TCP 3333::211:88FF:FE59:4424.22
2020::D480:1384:F58C:B114.1050
TCP 3333::211:88FF:FE59:4424.22
3333::2117:F1C0:90B:910D.1045
TCP ::.80
::.*
TCP ::.22
::.*
TCP 3333::211:88FF:FE59:4424.80
Address
MAC Address
00:04:76:73:42:31 True
State
ESTABLISHED
TIME_WAIT
LISTEN
ESTABLISHED
ESTABLISHED
LISTEN
LISTEN
ESTABLISHED
SecureStack B3 Configuration Guide 19-7
show ipv6 netstat
Last
isRtr State Updated
-------
Reachable 00:01:16