Enterasys Matrix 2G4072-52 Configuration Manual page 374

Configuring LACP
Configuring Link Aggregation
Examples
This example shows how to display detailed LACP status information
Matrix(rw)-> show port lacp port fe.1.12 status detail
Port Instance:
ActorPort:
ActorSystemPriority:
ActorPortPriority:
ActorAdminKey:
ActorOperKey:
ActorAdminState:
ActorOperState:
ActorSystemID:
SelectedAggID:
AttachedAggID:
MuxState:
DebugRxState:
NOTES: State definitions, such as ActorAdminState and Partner AdminState, are
indicated with letter abbreviations. If the show port lacp command displays one or
more of the following letters, it means the state is true for the associated actor or partner
ports:
E = Expired; F = Defaulted; D = Distributing (tx enabled); C = Collecting (rx enabled);
S = Synchronized (actor and partner agree); G = Aggregation allowed; S/l = Short/Long
LACP timeout; A/p = Active/Passive LACP.
For more information about these states, refer to set port lacp
the IEEE 802.3 2002 specification.
This example shows how to display summarized LACP status information for port fe.1.12:
Matrix(rw)->show port lacp port fe.1.12 status summary
Port Aggr
fe.1.12 none
4-114 Matrix DFE-Platinum and Diamond Series Configuration Guide
fe.1.12
1411
32768
32768
32768
32768
-----GlA
-F----lA
00-e0-63-9d-b5-87
none
none
Detached
port Disabled
Actor System
Pri: System ID:
[
(32768,00e0639db587,32768),(32768,000000000000, 1411)
PartnerAdminPort:
PartnerOperPort:
PartnerAdminSystemPriority:
PartnerOperSystemPriority:
PartnerAdminPortPriority:
PartnerOperPortPriority:
PartnerAdminKey:
PartnerOperKey:
PartnerAdminState:
PartnerOperState:
PartnerAdminSystemID:
PartnerOperSystemID:
Partner System
Key: Pri: System ID:
f
or port fe.1.12:
--DCSGlp
--DC-Glp
00-00-00-00-00-00
00-00-00-00-00-00
(Section 4.5.4.13) and
Key:
]
1411
1411
32768
32768
32768
32768
1411
1411