Port Configuration Command Set
Configuring Link Traps and Link Flap Detection
4.3.8.10
set linkflap downtime
Use this command to set the time interval (in seconds) one or more ports will be held down after a
link flap violation.
set linkflap downtime port-string downtime_value
Syntax Description
port-string
downtime_value
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Examples
This example shows how to set the link flap downtime on port fe.1.4 to 5000 seconds:
Matrix(rw)->set linkflap downtime fe.1.4 5000
4-80 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies the port(s) on which to set the link flap downtime.
For a detailed description of possible port-string values,
refer to
Section
4.1.1.
Specifies a downtime in seconds. A value of 0 will set the
downtime to forever.