Basic Monitoring Parameters; I/O Monitoring - Danfoss VACON 100 FLOW Series Application Manual

VACON® 100 FLOW
Application Guide
Check the statuses of the expander I/O board in the I/O and Hardware menu when the system asks.

5.4.2 Basic Monitoring Parameters

Table 14: Items in the Basic Monitoring Menu
Index Monitoring value
V2.3.1 Output frequency
V2.3.2 Frequency reference
V2.3.3 Motor speed
V2.3.4 Motor current
V2.3.5 Motor torque
V2.3.7 Motor shaft power
V2.3.8 Motor shaft power
V2.3.9 Motor voltage
V2.3.10 DC-link voltage
V2.3.11 Unit temperature
V2.3.12 Motor temperature
V2.3.13 Motor Preheat
V2.3.15 kWh Trip Counter Low
V2.3.14 kWh Trip Counter High

5.5 I/O Monitoring

Table 15: I/O Signal Monitoring
Index Monitoring value
V2.4.1 Slot A DIN 1, 2, 3
V2.4.2 Slot A DIN 4, 5, 6
V2.4.3 Slot B RO 1, 2, 3
V2.4.4 Analog input 1
V2.4.5 Analog input 2
V2.4.6 Analog input 3
V2.4.7 Analog input 4
V2.4.8 Analog input 5
V2.4.9 Analog input 6
V2.4.10 Slot A AO1
78 | Danfoss A/S © 2023.08
Unit Scale ID
Hz 0.01 1
Hz 0.01 25
RPM 1 2
A Varies 3
% 0.1 4
% 0.1 5
kW/hp Varies 73
V 0.1 6
V 1 7
°C 0.1 8
% 0.1 9
1 1228
kWh 1 1054
1 1067
Unit Scale
1
1
1
% 0.01
% 0.01
% 0.01
% 0.01
% 0.01
% 0.01
% 0.01
Description
0 = OFF
1 = Heating (feeding DC-current)
ID Description
15
16
17
59 Slot A.1 as default.
60 Slot A.2 as default.
61 Slot D.1 as default.
62 Slot D.2 as default.
75 Slot E.1 as default.
76 Slot E.2 as default.
81
AB298035655957en-000201 / DPD01083
Monitor Menu