Danfoss VACON 100 FLOW Series Application Manual page 195

VACON® 100 FLOW
Application Guide
A B
READY
STOP
Digital Inputs
ID:405
Ext Fault Close
DigINSlotA.3
Ext Fault Open
DigINSlot0.2
Fault Reset Close
DigINSlotA.6
Illustration 52: The Digital Inputs Menu in the Graphical Display
A The graphical display
B The name of the parameter, that is, the function
A
Illustration 53: The Digital Inputs Menu in the Text Display
A The text display
B The name of the parameter, that is, the function
Example
In the standard I/O board compilation, there are 6 digital inputs available: the slot A terminals 8, 9, 10, 14, 15 and 16.
Input type (graphical Input type
display) (text display)
DigIN dI
DigIN dI
DigIN dI
DigIN dI
DigIN dI
DigIN dI
Danfoss A/S © 2023.08
C
I/O
P3.5.1.11
B
C
Slot Input #
A 1
A 2
A 3
A 4
A 5
A 6
C The value of the parameter, that is, the set digital in-
put
C The value of the parameter, that is, the set digital in-
put
Explanation
Digital input #1 (terminal 8) on a board in Slot A (standard I/O board).
Digital input #2 (terminal 9) on a board in Slot A (standard I/O board).
Digital input #3 (terminal 10) on a board in Slot A (standard I/O board).
Digital input #4 (terminal 14) on a board in Slot A (standard I/O board).
Digital input #5 (terminal 15) on a board in Slot A (standard I/O board).
Digital input #6 (terminal 16) on a board in Slot A (standard I/O board).
Parameter Descriptions
AB298035655957en-000201 / DPD01083 | 195