Condition-Based Monitoring; Baseline Data - Danfoss VACON 100 FLOW Series Application Manual

VACON® 100 FLOW
Application Guide
Monitoring Value Descriptions
This monitoring value shows the value of the function block output in the Drive customizer function.
10.12.6 (ID 15120) Block Out.6
Location in the menu: V2.13.7
This monitoring value shows the value of the function block output in the Drive customizer function.
10.12.7 (ID 15140) Block Out.7
Location in the menu: V2.13.8
This monitoring value shows the value of the function block output in the Drive customizer function.
10.12.8 (ID 15160) Block Out.8
Location in the menu: V2.13.9
This monitoring value shows the value of the function block output in the Drive customizer function.
10.12.9 (ID 15180) Block Out.9
Location in the menu: V2.13.10
This monitoring value shows the value of the function block output in the Drive customizer function.
10.12.10 (ID 15200) Block Out.10
Location in the menu: V2.13.11
This monitoring value shows the value of the function block output in the Drive customizer function.

10.13 Condition-based Monitoring

10.13.1 Baseline Data

10.13.1.1 (ID 3601) Baseline Data Element 1
Location in the menu: V2.16.1.1
This monitoring value shows the baseline data. The baseline data is selected using the baseline data selector.
10.13.1.2 (ID 3602) Baseline Data Element 2
Location in the menu: V2.16.1.2
This monitoring value shows the baseline data. The baseline data is selected using the baseline data selector.
10.13.1.3 (ID 3603) Baseline Data Element 3
Location in the menu: V2.16.1.3
This monitoring value shows the baseline data. The baseline data is selected using the baseline data selector.
10.13.1.4 (ID 3604) Baseline Data Element 4
Location in the menu: V2.16.1.4
This monitoring value shows the baseline data. The baseline data is selected using the baseline data selector.
10.13.1.5 (ID 3605) Baseline Data Element 5
Location in the menu: V2.16.1.5
This monitoring value shows the baseline data. The baseline data is selected using the baseline data selector.
10.13.1.6 (ID 3606) Baseline Data Element 6
Location in the menu: V2.16.1.6
This monitoring value shows the baseline data. The baseline data is selected using the baseline data selector.
10.13.1.7 (ID 3607) Baseline Data Element 7
Location in the menu: V2.16.1.7
This monitoring value shows the baseline data. The baseline data is selected using the baseline data selector.
Danfoss A/S © 2023.08 AB298035655957en-000201 / DPD01083 | 163