Stator Winding Monitor; Vibration - Danfoss VACON 100 FLOW Series Application Manual

VACON® 100 FLOW
Application Guide
Monitoring Value Descriptions
10.13.1.8 (ID 3608) Baseline Data Element 8
Location in the menu: V2.16.1.8
This monitoring value shows the baseline data. The baseline data is selected using the baseline data selector.
10.13.1.9 (ID 3609) Baseline Data Element 9
Location in the menu: V2.16.1.9
This monitoring value shows the baseline data. The baseline data is selected using the baseline data selector.
10.13.1.10 (ID 3610) Baseline Data Element 10
Location in the menu: V2.16.1.10
This monitoring value shows the baseline data. The baseline data is selected using the baseline data selector.
10.13.1.11 (ID 3622) Baseline Run Status
Location in the menu: V2.16.1.11
This monitoring value shows the baseline run status.

10.13.2 Stator Winding Monitor

10.13.2.1 (ID 3617) Current Unbalance
Location in the menu: V2.16.2.1
This monitoring value shows the current unbalance when condition-based monitoring is activated.
10.13.2.2 (ID 3620) Current Unbalance Threshold Value
Location in the menu: V2.16.2.2
This monitoring value shows the threshold value after interpolating.
10.13.2.3 (ID 3611) Current Warning S1 High Threshold
Location in the menu: V2.16.2.3
This monitoring value shows the warning S1 high threshold value.
10.13.2.4 (ID 3612) Current Warning S2 High Threshold
Location in the menu: V2.16.2.4
This monitoring value shows the warning S2 high threshold value.
10.13.2.5 (ID 3613) Current Alarm High Threshold
Location in the menu: V2.16.2.5
This monitoring value shows the alarm/fault high threshold value.

10.13.3 Vibration

10.13.3.1 (ID 3623) Vibration
Location in the menu: V2.16.3.1
This monitoring value shows the vibration when condition-based monitoring is activated.
10.13.3.2 (ID 3624) Vibration Threshold Value
Location in the menu: V2.16.3.2
This monitoring value shows the threshold value after interpolating.
10.13.3.3 (ID 3625) Vibration S1 High Threshold
Location in the menu: V2.16.3.3
This monitoring value shows the warning S1 high threshold value.
164 | Danfoss A/S © 2023.08 AB298035655957en-000201 / DPD01083