Danfoss VACON 100 FLOW Series Application Manual page 101

VACON® 100 FLOW
Application Guide
Index Parameter Min
P3.5.3.2.2 RO1 ON 0.00
Delay
P3.5.3.2.3 RO1 OFF 0.00
Delay
P3.5.3.2.4 RO2 Func- 0
tion
P3.5.3.2.5 RO2 ON 0.00
Delay
P3.5.3.2.6 RO2 OFF 0.00
Delay
P3.5.3.2.7 RO3 Func- 0
tion
P3.5.3.2.8 R03 ON De- 0.00
lay
P3.5.3.2.9 R03 OFF 0.00
Delay
The Digital Outputs of the Expander Slots C, D, and E
Shows only the parameters for the outputs on option boards in slots C, D, and E. Make the selections as in Basic AO1 Function
(P3.5.4.1.1). This group or these parameters are not visible if there are no digital outputs in slots C, D, or E.
Table 52: Analog Output Settings on Standard I/O board
Index Parameter
P3.5.4.1.1 AO1 function
Danfoss A/S © 2023.08
Max Unit De-
fault
320.00 s 0.00
320.00 s 0.00
56 Varies
320.00 s 0.00
320.00 s 0.00
56 Varies
320.00 s 0.00
320.00 s 0.00
N O T I C E
Min Max Unit
0 31
ID Description
72 = AHF Cap Disconnect
73 = AHF Cap Disconnect Inv
74 = Run indication
75 = Motor Switch Open
11002
11003
11004 See P3.5.3.2.1.
11005 See P3.5.3.2.2.
11006 See P3.5.3.2.3.
11007 See P3.5.3.2.1. Not visible if only 2 output relays are installed.
11008 See P3.5.3.2.2. Not visible if only 2 output relays are installed.
11009 See P3.5.3.2.3. Not visible if only 2 output relays are installed.
Default ID Description
2
(1)
10050 0 = TEST 0% (Not used)
1 = TEST 100%
2 = Output freq (0 - fmax)
3 = Freq reference (0 - fmax)
4 = Motor speed (0 - Motor nominal speed)
5 = Output current (0 - InMotor)
6 = Motor torque (0 - TnMotor)
7 = Motor power (0 - PnMotor)
8 = Motor voltage (0 - UnMotor)
9 = DC link voltage (0–1000 V)
10 = PID Setpoint (0–100%)
11 = PID Feedback (0–100%)
12 = PID1 output (0–100%)
13 = Ext.PID output (0–100%)
Parameters Menu
AB298035655957en-000201 / DPD01083 | 101