Group 3.18: Motor Preheat Parameters; Group 3.19: Drive Customizer; Group 3.21: Pump Control - Danfoss VACON 100 FLOW Series Application Manual

VACON® 100 FLOW
Application Guide
Index Parameter
V3.17.8 Fire Mode Counter
P3.17.9 Fire Mode Run Indication
Current

6.18 Group 3.18: Motor Preheat Parameters

Table 97: Motor Preheat Parameters
Index Parameter
P3.18.1 Motor Preheat Function
P3.18.2 Preheat Temperature Limit
P3.18.3 Motor Preheat Current
P3.18.4 Motor Preheat ON
P3.18.5 Preheat Motor Temperature

6.19 Group 3.19: Drive Customizer

Table 98: Drive Customizer Parameters
Index Parameter
P3.19.1 Operation Mode

6.20 Group 3.21: Pump Control

Table 99: Auto-cleaning Parameters
Index Parameter
P3.21.1.1 Cleaning Function
Danfoss A/S © 2023.08
Min Max Unit Default
0 65535
0 100 % 10
Min Max Unit Default
0 3 0
-20 100 °C/F 0
0 0.5*IL A Varies
Varies Varies DigIN Slot0.1
0 6 0
Min Max Unit
0 1
Min Max
0 3
ID Description
3 = Test Mode
See 5.4.2 Basic Monitoring
1679
15580
ID Description
1225 0 = Not used
1 = Always in stop state
2 = Controlled by DI
3 = Temperature limit, heatsink
1226
1227
1044 OPEN = No action
CLOSED = Preheat activated in Stop state
1045 0 = Not Used
1 = Temperature Input 1
2 = Temperature Input 2
3 = Temperature Input 3
4 = Temperature Input 4
5 = Temperature Input 5
6 = Temperature Input 6
Default ID Description
1 15001 0 = Execute Program
1 = Programming
Unit Default ID
0 1714
AB298035655957en-000201 / DPD01083 | 127
Parameters Menu
Parameters.
Description
0 = Disabled
1 = Enabled (DIN)
2 = Enabled (current)