VACON® 100 FLOW
Application Guide
12.3.22 Fault Code 8, ID 648 - System Fault
Cause
•
Operation malfunction.
•
The system software is not compatible with the application.
Troubleshooting
•
Reset the fault and restart.
•
Download the latest software from the Danfoss Drives website. Update the drive with it.
•
If the fault occurs again, ask for instructions from your nearest distributor.
12.3.23 Fault Code 8, ID 649 - System Fault
Cause
•
A resource overload.
•
A parameter loading, restoring or saving malfunction.
Troubleshooting
•
Load the factory default settings.
•
Download the latest software from the Danfoss Drives website. Update the drive with it.
12.3.24 Fault Code 8, ID 667 - System Fault
Cause
•
Ethernet PHY is not recognized or it is in the wrong state.
Troubleshooting
•
Reset the fault and restart the AC drive.
•
Download the newest software from the Danfoss Drives website. Update the drive with it.
•
If the fault occurs again, ask for instructions from your nearest distributor.
12.3.25 Fault Code 8, ID 670 - System Fault
Cause
•
The output voltage is too low because of overload, a defective component, or a shortcut.
Troubleshooting
•
Check the loading of the auxiliary output.
•
Reset the fault and restart the AC drive.
•
Download the newest software from the Danfoss Drives website. Update the drive with it.
•
If the fault occurs again, ask for instructions from your nearest distributor.
12.3.26 Fault Code 8, ID 827 - System Fault
Cause
•
Invalid/incorrect license key provided (via keypad or VCX).
•
The license key is incorrect or not for this drive.
Troubleshooting
•
Reset the fault and restart the AC drive.
•
Enter the license key to the AC drive again.
•
Download the newest software from the Danfoss Drives website. Update the drive with it.
•
If the fault occurs again, ask for instructions from your nearest distributor.
12.3.27 Fault Code 8, ID 828 - System Fault
Cause
•
The entered license key was accepted and stored to the drive.
300 | Danfoss A/S © 2023.08
Fault Tracing
AB298035655957en-000201 / DPD01083
Need help?
Do you have a question about the VACON 100 FLOW Series and is the answer not in the manual?
Questions and answers