VACON® 100 FLOW
Application Guide
•
ID1780: 18 (minutes)
•
ID1781: 0 (seconds)
12.4.5 Energy Counter
The energy counter counts the total quantity of energy that the drive gets from the supply network. The counter cannot be reset. To
read the value of the counter through fieldbus, use these ID numbers.
ID number
ID 2291
The value always has 4 digits. The format and the unit of the counter change to agree with the energy counter value.
Example
•
0.001 kWh
•
0.010 kWh
•
0.100 kWh
•
1.000 kWh
•
10.00 kWh
•
100.0 kWh
•
1.000 MWh
•
10.00 MWh
•
100.0 MWh
•
1.000 GWh
•
and so on
ID number
ID 2303
The energy counter format gives the position of the decimal point in the value of the Energy Counter.
•
40 = 4 digits, 0 fractional digits
•
41 = 4 digits, 1 fractional digit
•
42 = 4 digits, 2 fractional digits
•
43 = 4 digits, 3 fractional digits
Example
•
0.001 kWh (Format = 43)
•
100.0 kWh (Format = 41)
•
10.00 MWh (Format = 42)
ID number
ID 2305
The energy counter unit gives the unit for the value of the Energy Counter.
•
0 = kWh
•
1 = MWh
•
2 = GWh
•
3 = TWh
•
4 = PWh
Danfoss A/S © 2023.08
Counter value
Energy Counter
Counter value
Energy Counter Format
Counter value
Energy Counter Unit
Fault Tracing
AB298035655957en-000201 / DPD01083 | 323