Danfoss VACON 100 FLOW Series Application Manual page 216

VACON® 100 FLOW
Application Guide
Parameter Descriptions
The data is scaled to an unsigned 16-bit format according to the format on the control panel. For example, value 25.5 on the display
equals 255.
11.8.9 (ID 890) FB DataOut 9 Selection
Location in the menu: P3.6.9
Use this parameter to select the data that is sent to the fieldbus with the ID number of the parameter or monitor value.
The data is scaled to an unsigned 16-bit format according to the format on the control panel. For example, value 25.5 on the display
equals 255.
11.8.10 (ID 891) FB DataOut 10 Selection
Location in the menu: P3.6.10
Use this parameter to select the data that is sent to the fieldbus with the ID number of the parameter or monitor value.
The data is scaled to an unsigned 16-bit format according to the format on the control panel. For example, value 25.5 on the display
equals 255.
11.8.11 (ID 892) FB DataOut 11 Selection
Location in the menu: P3.6.11
Use this parameter to select the data that is sent to the fieldbus with the ID number of the parameter or monitor value.
The data is scaled to an unsigned 16-bit format according to the format on the control panel. For example, value 25.5 on the display
equals 255.
11.8.12 (ID 893) FB DataOut 12 Selection
Location in the menu: P3.6.12
Use this parameter to select the data that is sent to the fieldbus with the ID number of the parameter or monitor value.
The data is scaled to an unsigned 16-bit format according to the format on the control panel. For example, value 25.5 on the display
equals 255.
11.8.13 (ID 894) FB DataOut 13 Selection
Location in the menu: P3.6.13
Use this parameter to select the data that is sent to the fieldbus with the ID number of the parameter or monitor value.
The data is scaled to an unsigned 16-bit format according to the format on the control panel. For example, value 25.5 on the display
equals 255.
11.8.14 (ID 895) FB DataOut 14 Selection
Location in the menu: P3.6.14
Use this parameter to select the data that is sent to the fieldbus with the ID number of the parameter or monitor value.
The data is scaled to an unsigned 16-bit format according to the format on the control panel. For example, value 25.5 on the display
equals 255.
11.8.15 (ID 896) FB DataOut 15 Selection
Location in the menu: P3.6.15
Use this parameter to select the data that is sent to the fieldbus with the ID number of the parameter or monitor value.
The data is scaled to an unsigned 16-bit format according to the format on the control panel. For example, value 25.5 on the display
equals 255.
11.8.16 (ID 897) FB DataOut 16 Selection
Location in the menu: P3.6.16
Use this parameter to select the data that is sent to the fieldbus with the ID number of the parameter or monitor value.
The data is scaled to an unsigned 16-bit format according to the format on the control panel. For example, value 25.5 on the display
equals 255.
11.8.17 (ID 888) Fieldbus Sign of Actual
Location in the menu: P3.6.17
Use this parameter to select the behavior for the sign of the fieldbus Speed Actual.
216 | Danfoss A/S © 2023.08 AB298035655957en-000201 / DPD01083