Danfoss VACON 100 FLOW Series Application Manual page 200

VACON® 100 FLOW
Application Guide
Source Function
SlotC.# Number (#) agrees to a digital input in slot C.
SlotD.# Number (#) agrees to a digital input in slot D.
SlotE.# Number (#) agrees to a digital input in slot E.
TimeChannel.# 1=Time Channel1, 2=Time Channel2, 3=Time Channel3
FieldbusCW.# Number (#) refers to a control word bit number.
FieldbusPD.# Number (#) refers to the process data 1 bit number.
11.7.3 Default Functions of Programmable Inputs
Table 131: Default Functions of the Programmable Digital and Analog Inputs
Input Terminal(s)
DI1 8
DI2 9
DI3 10
DI4 14
DI5 15
DI6 16
AI1 2/3
AI2 4/5
11.7.4 Digital Inputs
The parameters are functions that can be connected to a digital input terminal. The text DigIn Slot A.2 means the second input on
the slot A. It is also possible to connect the functions to time channels. The time channels work as terminals.
It is possible to monitor the statuses of the digital inputs and the digital outputs in the Multimonitoring view.
11.7.4.1 (ID 403) Control Signal 1 A
Location in the menu: P3.5.1.1
Use this parameter to select the digital input signal (Control Signal 1) that starts and stops the drive when the control place is I/O A
(FWD).
11.7.4.2 (ID 404) Control Signal 2 A
Location in the menu: P3.5.1.2
Use this parameter to select the digital input signal (Control Signal 2) that starts and stops the drive when the control place is I/O A
(REV).
11.7.4.3 (ID 434) Control Signal 3 A
Location in the menu: P3.5.1.3
Use this parameter to select the digital input signal (Control Signal 3) that starts and stops the drive when the control place is I/O A.
11.7.4.4 (ID 423) Control Signal 1 B
Location in the menu: P3.5.1.4
Use this parameter to select the digital input signal (Control Signal 1) that starts and stops the drive when the control place is I/O B.
200 | Danfoss A/S © 2023.08
Reference Function
A.1 Control Signal 1 A
A.2 Control Signal 2 A
A.3 External Fault Close
A.4 Preset Frequency Selection 0
A.5 Preset Frequency Selection 1
A.6 Fault Reset Close
A.1 AI1 Signal Selection
A.2 AI2 Signal Selection
Parameter Descriptions
Parameter index
P3.5.1.1
P3.5.1.2
P3.5.1.11
P3.5.1.21
P3.5.1.22
P3.5.1.13
P3.5.2.1.1
P3.5.2.2.1
AB298035655957en-000201 / DPD01083