Danfoss VACON 100 FLOW Series Application Manual page 286

VACON® 100 FLOW
Application Guide
11.24.9.10 (ID 3541) Current Warning S1 Counter
Location in the menu: P3.24.3.3.3.1
Use this parameter to set warning S1 counter value.
11.24.9.11 (ID 3542) Current Warning S2 Counter
Location in the menu: P3.24.3.3.3.2
Use this parameter to set warning S2 counter value.
11.24.9.12 (ID 3543) Current Alarm/Fault Counter
Location in the menu: P3.24.3.3.3.3
Use this parameter to set alarm/fault counter value.
11.24.9.13 (ID 3549) Stop Counter Delay
Location in the menu: P3.24.2.3.4, P3.24.4.4.4, and P3.24.5.3.4
Location in the menu: P3.23.2.3.4, P3.23.4.4.4, and P3.23.5.3.4
Use this parameter to set stop counter. The counter is stopped if threshold value is outside of the limit below this time.
11.24.9.14 (ID 3555) Vibration Warning S1 Mode
Location in the menu: P3.24.4.3.1
Use this parameter to select the warning S1 mode which is used for calculating warning S1 notification threshold.
Selection number Selection name
0 Absolute
1 Offset
2 Factor
11.24.9.15 (ID 3556) Vibration Warning S1 High
Location in the menu: P3.24.4.3.2
Use this parameter to set the threshold value for computing the warning 1 high notification threshold. Threshold value range varies
based on warning mode selection. This limit is not used when value is zero.
11.24.9.16 (ID 3557) Vibration Warning S1 Delay
Location in the menu: P3.24.4.3.3
Use this parameter to define how long time the actual value must be above the warning S1 notification level to trigger the warning
S1. This level is not used when delay is zero.
11.24.9.17 (ID 3558) Vibration Warning S2 Mode
Location in the menu: P3.24.4.3.4
Use this parameter to select the warning S2 mode which is used for calculating warning S2 notification threshold.
Selection number Selection name
0 Absolute
1 Offset
2 Factor
11.24.9.18 (ID 3559) Vibration Warning S2 High
Location in the menu: P3.24.4.3.5
286 | Danfoss A/S © 2023.08
Description
Absolute value is considered as threshold
Calculates threshold as sum of the computed baseline data and the offset values
Calculates threshold as baseline data factor
Description
Absolute value is considered as threshold
Calculates threshold as sum of the computed baseline data and the offset values
Calculates threshold as baseline data factor
Parameter Descriptions
AB298035655957en-000201 / DPD01083