Reading Help Texts; Using The Favourites Menu; Text Display; Editing The Text Values - Danfoss VACON 100 FLOW Series Application Manual

VACON® 100 FLOW
Application Guide
A The current value
B The value of the other set

2.3.8 Reading Help Texts

The graphical display can show help texts on many topics. All the parameters have a help text. The help texts are also available for
the faults, alarms, and the start-up wizard.
The help texts are always in English.
Procedure
1. Find the item to read.
2.
Use the arrow buttons Up and Down to select Help.

STOP
Edit
Help
Add to favourites
3. To open the help text, push the [OK] button.

2.3.9 Using the Favourites Menu

If the same items are used frequently, add them into Favourites. Collect a set of parameters or monitoring signals from all the con-
trol panel menus. See 9.2.2 Adding an Item to the

2.4 Text Display

2.4.1 Editing the Text Values

This topic gives instructions on how to edit text values on the text display.
Procedure
1. Find the parameter with the arrow buttons.
2. To go to the Edit mode, push the [OK] button.
3. To set a new value, push the arrow buttons Up and Down.

4.
Accept the change with the [OK] button. To ignore the change, use the [BACK/RESET] button.
24 | Danfoss A/S © 2023.08
N O T I C E
READY I/O
Ctrl signal 1 A
ID:403 M3.5.1.1
Favourites.
C The current value
D The value of the other set
AB298035655957en-000201 / DPD01083
User Interfaces