Changing The Rotation Direction - Danfoss VACON 100 FLOW Series Application Manual

VACON® 100 FLOW
Application Guide
4. To change the digits in the value, push the arrow buttons Up and Down. Accept the change with the [OK] button.

STOP
Output Frequency
Motor Current

2.3.5.4 Changing the Rotation Direction

The rotation direction of the motor can be changed quickly with the [FUNCT] button.
The command Change direction is available in the menu only if the current control place is Local.
Procedure
1.
Anywhere in the menu structure, push the [FUNCT] button.
2.
To select Change direction, push the arrow buttons Up and Down. Push the [OK] button.
3. Select a new rotation direction.

The current rotation direction blinks.
RUN
4.
Push the [OK] button.

The rotation direction changes immediately. The arrow indication in the status field of the display changes.
STOP
Monitor
Parameters
Diagnostics
Danfoss A/S © 2023.08
READY Keypad
Keypad Reference
ID: 168
0.00Hz
Motor Torque
0.00Hz 0.00%
Motor Power
0.00A 0.00%
N O T I C E
READY Keypad
Choose action
ID:1805
Reverse
Forward
READY I/O
Main Menu
ID: M1
( 7 )
( 15 )
( 6 )
User Interfaces
AB298035655957en-000201 / DPD01083 | 21