8.3 Hydraulics Troubleshooting
Refer to the table provided below if you encounter problems with the hydraulic system while operating the windrower.
Problem
Symptom: Header or reel is not lifting.
Appropriate solenoids not being
energized by activating switch
Symptom: Reel and/or conveyor is not turning.
Flow controls adjusted too low
Appropriate solenoid on flow control
block not being energized
Relief pressure too low
Symptom: Hydraulic oil high-temperature alarm activates.
Hydraulic oil cooling system not
working properly
262171
TROUBLESHOOTING
Solution
Contact Dealer.
Toggle speed controls on
™
HarvestTouch
Display to increase
flow.
Contact Dealer.
Check/adjust/clean relief valve.
Check/clean cooling box.
440
Section
—
Conveyor Speed Adjustment Buttons,
page 83
and
Reel and Disc Speed Switch, page 79
—
—
6.9.2 Cleaning Cooler Module, page
334
Revision A