Checking Steering Link Pivots - MacDon M2170NT Operator's Manual

IMPORTANT:
Ensure the device being connected to the power posts has an
amperage rating less than that of the maximum fuse rating listed
on auxiliary power posts' decal (A). 30 Amp loads and smaller are
recommended as anything larger may blow the fuse if the device
has a high in-rush current characteristic.

6.14.2 Checking Steering Link Pivots

The checks outlined in this section should be performed every year.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator's seat for any reason.
1. Place ground speed lever (GSL) (A) in PARK, shut down the
engine, and remove the key from the ignition.
262171
MAINTENANCE AND SERVICING
Figure 6.154: Auxiliary Power Posts Decal
Figure 6.155: Console
382
A
A
Revision A