MacDon M2170NT Operator's Manual page 335

3. Screw new filter (A) onto the mount until the gasket just
contacts the filter head.
4. Tighten the filter an additional 1/2 turn by hand.
IMPORTANT:
Do NOT use a filter wrench to install the oil filter;
overtightening can damage the gasket and filter.
5. Check hydraulic fluid levels. For instructions, refer to
Checking Hydraulic Oil, page
6.1.2 Lubricants, Fluids, and System Capacities, page
262171
MAINTENANCE AND SERVICING
6.7.3
319. For capacity level, refer to
279.
Figure 6.49: M2170NT Charge Filter
315
A
Revision A