Maintaining Engine Air Filters; Removing Primary Engine Air Filter - MacDon M2170NT Operator's Manual

3. Clean the area around filler cap (A). Turn the cap
counterclockwise to unlock it. Remove the cap.
4. Carefully pour in the new oil. A funnel is recommended to
avoid spillage. For oil specifications, refer to
Lubricants, Fluids, and System Capacities, page
IMPORTANT:
Do NOT fill above the HIGH mark.
5. Replace oil filler cap (A) and turn it clockwise until it is snug.
6. Check the oil level. For instructions, refer to
7. Close the hood. For instructions, refer to

6.10.2 Maintaining Engine Air Filters

Engine air filters keep out dust and pollutants while allowing oxygen to reach the engine. Proper maintenance of engine air
filters results in smoother machine operation.

Removing Primary Engine Air Filter

The windrower's HarvestTouch
must first be removed before it can be replaced.
1. Shut down the engine, and remove the key from the ignition.
2. Stand on the right service platform.
3. Open the hood. For instructions, refer to
4. Slightly lift catch (A) at the side of end cap (B). Rotate the
end cap counterclockwise until it stops.
262171
MAINTENANCE AND SERVICING
6.1.2
279.
6.7.1 Checking Engine Oil Level, page
6.3.2 Closing Hood, page
™
Displaywill alert the Operator when the engine air filter requires service. The air filter
6.3.1 Opening Hood, page
Figure 6.88: Oil Filler Cap
288.
287.
Figure 6.89: Air Filter Housing
341
A
316.
A
B
Revision A