Tilt; Lumbar Support - MacDon M2170NT Operator's Manual

3.3.6 Tilt

Use the controls on the side of the seat to adjust the seat's tilt.
1. Pull lever (A) up to release.
2. Position the seat back as desired.
3. Release lever (A).

3.3.7 Lumbar Support

Use the controls on the back of the seat adjust the stiffness of the seat's back.
• Rotate knob (A) clockwise to increase the lumbar support.
• Rotate knob (A) counterclockwise to decrease the lumbar
support.
262171
OPERATOR'S STATION
Figure 3.9: Operator's Seat Tilt Controls
Figure 3.10: Operator's Seat Lumbar Support Controls
47
A
A
Revision A