Table of Contents
Advertisement
NOTE:
When ground speed is less than the set minimum reel
speed, the reel operates at the reel minimum speed. The
minimum reel speed is displayed and "MIN" will replace
AUTO (A) and the index value.
Setting Reel Speed in Manual Mode
This adjustment requires the header to be engaged. The instructions in this section show you how to set the reel speed in
manual mode.
1. Engage the header to display header run screen 1 or 2.
2. To set reel speed control to manual, press REEL SETTINGS
icon (A) to access the REEL ADJUST page.
3. Set AUTO switch (A) to the OFF position.
NOTE:
In manual mode, RPM switch (B) changes the displayed reel
speed units from km/h (mph) to rpm.
262171
OPERATION
Figure 5.131: HarvestTouch
Run Screen
Figure 5.132: HarvestTouch
Run Screen
Figure 5.133: Reel Adjust Page
257
A
™
Display - Header
A
™
Display - Header
A
B
Revision A
Advertisement
Table of Contents
Troubleshooting
