Table of Contents
Advertisement
MD #306179/306180/306181
Header crushing hazard
DANGER
To prevent injury or death from the fall of a raised header:
• Fully raise the header, stop the engine, remove the key from
the ignition, and engage the safety props before going under
the header.
MD #306756
Hot fluid spray hazard, engine coolant fill rate instructions, and
engine coolant specifications
CAUTION
The engine cooling system is under pressure when the engine
coolant is hot. To prevent injury:
• Do NOT remove the fluid fill cap when the engine is hot.
• Allow the engine to cool down before you open the fluid
fill cap.
• If possible, use the specified Peak Final Charge Global or
Fleetguard EX Compleat OAT nitrite-free coolants. If they are
unavailable, use nitrite-free coolant that meets ASTM D6210
and CES 14603 specifications.
• Fill the tank slowly. Do NOT exceed a fill rate of 11 L/min
(3 gpm).
262171
SAFETY
Figure 1.48: MD #306179/306180/306181
Figure 1.49: MD #306756
29
Revision A
Advertisement
Table of Contents
Troubleshooting
