Table of Contents
Advertisement
ATTACHING HEADERS TO AND DETACHING HEADERS FROM WINDROWER
5. Prepare the header as follows:
• If the header supports are installed on the windrower:
Remove ring (A) and pin (B) from the header leg.
• If the header supports are installed in the header:
Remove hairpin (C) and clevis pin (D) from the
header support.
Repeat this step on the other header leg.
6. Start the engine.
262171
B
Figure 4.44: Header Leg — Left Side Shown
132
A
C
D
Revision A
Advertisement
Table of Contents
Troubleshooting
