MacDon M2170NT Operator's Manual page 42

Hide thumbs Also See for M2170NT:

Table of Contents

General hazard pertaining to machine operation and servicing

To prevent injury or death from improper or unsafe machine

• Follow all of the safety instructions provided in the

machine's operator's manual. If you do not have a manual,

obtain one from your Dealer.

• Do NOT allow untrained persons to operate the machine.

• Review the safety instructions in this manual with all

Operators every year.

• Ensure that all safety signs are installed and legible.

• Ensure that everyone is clear of the machine before starting

the engine and during its operation.

• Do not allow riders on the machine.

• Keep all shields in place. Stay clear of moving parts.

• Disengage the header drive, put the transmission in Neutral,

and wait for all movement to stop before you leave the

operator's seat.

• Stop the engine and remove the key from the ignition

before you service, adjust, lubricate, clean, or unplug the

• Engage the safety locks to the header or reel from falling

before servicing the header when it is in the raised position.

• Use a slow-moving vehicle emblem and activate the

machine's warning lights when operating on roadways,

unless these actions are prohibited by law.

Figure 1.35: MD #166454

Troubleshooting