Closing Battery Cover - MacDon M2170NT Operator's Manual

1. Shut down the engine, and remove the key from the ignition.
2. Open the hood. For instructions, refer to
3. Lift up on the cab-end of cover (A) to disengage it from
retaining tab (B), and swing the cover away from the frame.

Closing Battery Cover

Properly closing the battery cover will protect the battery from moisture, dust, and corrosion.
1. Swing cover (A) towards the windrower frame. Lift up on
the cab-end of the cover until it is secured by retaining
tab (B) on the frame.
262171
MAINTENANCE AND SERVICING
6.3.1 Opening Hood, page
Figure 6.141: Battery Cover
Figure 6.142: Battery Cover
374
287.
B
A
B
A
Revision A