12. Move the ground speed lever (GSL) out of Park and slowly
accelerate to 5–8 km/h (3–5 mph).
13. While moving, press and hold REEL FORE button (A) on the
GSL to extend the drive wheel legs.
14. Bring the windrower to a complete stop, and place the GSL
in PARK.
15. Press F6 button (A) on the operator's console to activate
the walking beam controls. The F6 page (B) will display on
™
the HarvestTouch
Display.
16. Pivot the windrower to turn the caster wheels sideways as
shown on the F6 page (B).
262171
OPERATION
Figure 5.73: Transport Control Buttons
A - Reel Fore
Figure 5.74: Narrow Transport Controls
227
A
B
B - Reel Aft
B
A
Revision A