MacDon M2170NT Operator's Manual page 241

14. Connect transport drawbar (A) to hitch clevis (B), and
secure the drawbar with safety pin (C).
15. Connect the drawbar harness to weight box harness
DANGER
Ensure that all bystanders have cleared the area.
16. Start the engine.
17. Raise the weight box until the tow-bar is level. The header
is now ready for transport. For instructions, refer to
Header with Windrower, page
Attaching Hitch Clevis to Weight Box
A weight box is required when transporting a header behind the windrower. To accomplish this, a hitch clevis must first be
attached to the weight box.
MD #B6974
Follow the steps below to attach the hitch clevis to the weight box:
9. Weight box harness MD #B9052 must be ordered separately.
262171
OPERATION
9 (D).
Towing
218.
221
A
B
C
D
Figure 5.62: Weight Box with Harness, Hitch Clevis,
and Drawbar
Figure 5.63: Towing a Header
Revision A