Table of Contents
Advertisement
3.10 Cab Temperature
The temperature in the windrower cab is regulated by a climate control system which can provide filtered cool or warm air.
The heater shut-off valve must be open for the heater to work properly.
The heater/evaporator/blower assembly is located under the cab floor and is accessible from beneath the windrower.
3.10.1 Heater Shut-Off Valve
A shut-off valve at the engine allows the cab heater to be isolated from the engine coolant.
Valve (A) must be open to provide heat to the cab, but the valve
can be closed to maximize cooling.
3.10.2 Air Distribution
Cab air distribution is controlled through adjustable air vents located in the cab posts.
You can adjust vent (A) to open/close (B) or to change
direction (C) of the air flow.
3.10.3 Climate Controls
The climate controls are located on the console. Use them to change the temperature or adjust the air movement
inside the cab.
NOTE:
When switches (A), (C), (D), and (E) are activated, the LED light on the switch will turn amber.
262171
OPERATOR'S STATION
Figure 3.36: Heater Shut-Off Valve
Figure 3.37: Adjustable Air Vents
63
A A
A
C
B
Revision A
Advertisement
Table of Contents
Troubleshooting
