Charge Air Cooler - MacDon M2170NT Operator's Manual

Windrower
Hide thumbs Also See for M2170NT:
Table of Contents

Advertisement

3. Turn cap (A) counterclockwise to the first notch to relieve
pressure before removing the cap completely.
4. Turn cap (A) again and remove it.
5. Check the gasket for cracks or deterioration, and replace
the cap if necessary.
6. Check that the spring in the cap moves freely. Replace the
cap if the spring is stuck.
7. Close the hood. For instructions, refer to
Hood, page
288.

Charge Air Cooler

The charge air cooler (CAC) is located between the turbocharger and the air inlet manifolds. It cools the air from the
engine's turbo prior to it entering the combustion chamber.
A
Figure 6.21: Charge Air Cooler (CAC)
A - Turbocharger
C - Charge Air Cooler
262171
MAINTENANCE AND SERVICING
6.3.2 Closing
B
297
Figure 6.20: Coolant Tank
D
B - Charge Air Inlet Duct
D - Charge Air Outlet Duct
A
C
Revision A

Advertisement

Table of Contents
loading

Table of Contents