Windshield Wipers - MacDon M2170NT Operator's Manual

3.8 Windshield Wipers

The windshield wiper controls are located on the console.
The illustration shows the controls in cab-forward mode.
Button (A) activates the front (cab-forward) wiper, and
button (B) activates the rear wiper.
One window washer button (C) applies washer fluid to both the
front and rear wipers as follows:
• If both wipers are on, pressing and holding window washer
button (C) will spray washer fluid onto both windows. When
the button is released, the washer fluid stops, but both
wipers continue to operate.
• If both wipers are NOT on, pressing and holding window
washer button (C) will spray washer fluid onto both
windows, and both wipers will turn on. When the button is
released, the washer fluid stops, but both wipers continue
to operate for 4 seconds before automatically stopping.
• If only one wiper is on, pressing and holding window washer
button (C) will activate the other wiper and spray washer
fluid onto both windows. When the button is released, the
washer fluid stops, and the active wiper will continue to
operate while the activated wiper operates for only 4
seconds before automatically stopping.
You can aim rear wiper washer nozzle (A) by turning it with a
flat head screwdriver.
NOTE:
The front wiper washer nozzle is not adjustable.
262171
OPERATOR'S STATION
A
Figure 3.32: Wiper Controls
Figure 3.33: Rear Wiper Washer Nozzle
61
B
C
A
Revision A