Lighting; Cab-Forward Lighting - Field - MacDon M2170NT Operator's Manual

3.7 Lighting

The field and road light switches are located on the operator's console.
The position of the operator's station (cab-forward or engine-
forward) automatically determines which lights are active when
the lighting mode is selected.
NOTE:
When in engine-forward mode, field lights (B) do NOT turn on.
Road lights (A), field lights (B), and beacon lights (D) have an
amber LED that changes from OFF to amber when the switch is
turned on. Low or high beams (C) have a blue LED that changes
from OFF to blue when the switch is turned on.
3.7.1 Cab-Forward Lighting – Field
Field lights are used to illuminate the working area around the windrower.
The following lights are on when FIELD LIGHT button (A) is
selected and the operator's station is locked in cab-
forward mode:
262171
OPERATOR'S STATION
Figure 3.21: Light Switches
A - Road Lights
C - Low or High Beams
Figure 3.22: Field Light Button
55
D
C C
A
B
B - Field Lights
D - Beacons
A
Revision A