8. Rotate left signal light placard (A) to the down (horizontal)
position before driving in narrow transport mode.
9. Drive the windrower so that lift legs (A) are positioned in
weight box pockets (B). Raise the lift legs slightly.
10. Shut down the engine, and remove the key from the
ignition.
11. Install locking pin (C) into the pocket and secure it with
hairpin (D).
12. Repeat the previous step to install the locking pin in the
opposite leg.
13. Attach hitch clevis (A) to weight box (B). For instructions,
refer to
Attaching Hitch Clevis to Weight Box, page
262171
OPERATION
Figure 5.59: Left Signal Light Placard
Figure 5.60: Windrower Lift Linkage
221.
A
Figure 5.61: Weight Box with Harness and Hitch Clevis
220
A
B
D
A
C
B
Revision A