MacDon M2170NT Operator's Manual page 147

ATTACHING HEADERS TO AND DETACHING HEADERS FROM WINDROWER
19. Pull platform (A) toward the cab until it stops and the latch
is engaged.
20. Remove hose support (A) from the windrower's left leg.
21. Place hydraulics/electrical bundle (A) in the storage position
on the header.
22. Back the windrower away from the header.
23. Shut down the engine, and remove the key from
the ignition.
262171
Figure 4.35: Left Platform
B
Figure 4.36: Multicoupler
A
Figure 4.37: Hydraulics Hoses in Storage Position
127
A
A
A
Revision A