MacDon M2170NT Operator's Manual page 139

ATTACHING HEADERS TO AND DETACHING HEADERS FROM WINDROWER
2. Approach platform (A) on the left side of the windrower.
Ensure that the cab door is closed.
3. Push latch (B) and pull platform (A) toward the walking
beam until it stops and the latch engages.
4. Retrieve hydraulic multicouplers (A) and electrical
harness (B) from the header.
5. Route the hose/harness bundle toward the windrower
through support (C).
6. Insert hose support (B) into hole (A) in the windrower's left
leg. Route header hose bundle (C) under the windrower to
the hydraulic and electrical couplers.
262171
Figure 4.15: Left Platform
C
B
Figure 4.16: Hydraulic Hoses in Storage Position
C B
Figure 4.17: Multicoupler
119
A
A
A A
B
1015479
B
Revision A