One-Touch-Return; Adjusting Header Raise And Lower Rates - MacDon M2170NT Operator's Manual

5.4.6 One-Touch-Return

One-Touch-Return allows you to choose and apply presets on the ground speed lever (GSL).
Three presets can be applied to the A, B, and C keys (A). The
presets can be set to control variables such as height, tilt, reel
position, and speeds. For instructions, refer to
Return Buttons, page 80.

5.4.7 Adjusting Header Raise and Lower Rates

The header raise and lower rate settings control how fast a header is raised or lowered.
1. To access the Header Raise and Lower Rates page from the
home page or from a header run screen, press MENU (A) to
view the menu options.
2. Press SETUP (B) followed by HEADER (C).
NOTE:
The F4 shortcut button on the operator's console also will
display the HEADER SETUP page.
262171
OPERATION
One-Touch-
Figure 5.114: GSL
Figure 5.115: HarvestTouch
248
A
C
™
Display
A
B
A
Revision A