Table of Contents
Advertisement
2. Use KNIFE SPEED arrows (A) to adjust the strokes per
minute (spm) value.
NOTE:
For information and suggested knife speed settings for a
variety of crops and conditions, refer to the header
operator's manual.
Adjusting Knife Speed and Pressure Alarms
The knife alarm features in the HarvestTouch
specified range.
1. To set either of the knife alarms, engage the header to
display header run screen 1, and then press KNIFE
SETTINGS icon (A).
2. To adjust the KNIFE SPEED ALARM set point, press
arrows (A) until the desired value is shown.
NOTE:
The knife speed alarm alerts the Operator when knife
speed drops below a specified percentage of preset knife
speed. In the example shown, the alarm will sound if knife
speed drops below 1120 spm. The default is 70% and the
adjustment range is 50–90%.
262171
OPERATION
Figure 5.172: Knife Adjust Page
™
Display can inform the Operator when knife speed or pressure exceed a
Figure 5.173: HarvestTouch
Run Screen
Figure 5.174: Knife Adjust Page
276
A
A
™
Display - Header
A
Revision A
Advertisement
Table of Contents
Troubleshooting
