Chapter 2: Product Overview; Definitions - MacDon M2170NT Operator's Manual

Chapter 2: Product Overview

The definitions of the technical terms used in this manual, the machine's specifications, and the locations of key
components on the machine are provided.

2.1 Definitions

The following terms, abbreviations, and acronyms are used in this manual.
Table 2.1 Definitions
Term
A Series Header
API
ASTM
Bolt
Cab-forward
CGVW
D1X Series Header
D1XL Series Header
D2 SP Series Draper Header
DEF
DEF supply module
DM
DOC
DWA
EEC
Engine-forward
FFFT
Finger tight
™
HarvestTouch Display
Header
Hex key
HDS
JIC
Knife
n/a
NPT
Nut
262171
Definition
MacDon A30S, A30D, A40D, A40DX, and Grass Seed auger headers
American Petroleum Institute
American Society of Testing and Materials
A headed and externally threaded fastener designed to be paired with a nut
Windrower operation mode in which the Operator's seat faces the header
Combined gross vehicle weight
MacDon D115X, D120X, and D125X rigid draper headers for M1 and M2 Series
Windrowers
MacDon D130XL, D135XL, D140XL, and D145XL rigid draper headers for M1 and M2 Series
Windrowers
MacDon D215, D220, D225, D230, D235, and D241 Draper Headers for Windrowers
Diesel exhaust fluid; also known as AdBlue in Europe, and AUS 32 in Australia
A pump that supplies diesel exhaust fluid through the exhaust aftertreatment system
Dosing module
Diesel oxidation catalyst
Double Windrow Attachment
Eco engine control
Windrower operation with Operator and engine facing in direction of travel
Flats from finger tight
A reference position in which the given sealing surfaces or components are making
contact with each other. The fitting has been tightened by hand to a point where the
fitting is no longer loose and cannot be tightened further by hand
The touch screen display in an M2 Series Windrower
A machine that cuts and lays crop into a windrow when attached to a windrower
A tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal
socket in the head (internal-wrenching hexagon drive); also known as an Allen key
Hydraulic deck shift
Joint Industrial Council: A standards body that developed standard sizing and shape for
the original 37° flared fitting
A cutting device found on a header's cutterbar which uses a reciprocating cutter (also
called a sickle) to cut crop so that it can be fed into the header
Not applicable
National Pipe Thread: A style of fitting used for low-pressure port openings. Threads on
NPT fittings are uniquely tapered for an interference fit
An internally threaded fastener designed to be paired with a bolt
31
Revision A