Operating With A40Dx Auger Header; Auger Header Run Screens - MacDon M2170NT Operator's Manual

Hide thumbs Also See for M2170NT:

Table of Contents

5.6 Operating with A40DX Auger Header

The A40DX auger header has increased windrowing capacity, reliability, conditioning and windrow formation in just about

all hay and forage crops.

Two auger header specific run screens are viewable when operating the windrower with an auger header attached. The

screens are accessed on the HarvestTouch

To view header run screens, the header must be engaged. Swipe the touch screen left or right to change the run screen

page. For help with HarvestTouch

Run Screen 1 shows the reel/auger speed, reel/auger pressure, knife speed, the knife pressure, and the alarm set points.

Figure 5.156: Auger Header Run Screen 1

A - Reel Settings Icon

D - Reel Speed

G - Reel/Auger Pressure

K - Alarm Set Points

Display navigation, refer to

B - Knife Setting Icon

E - Knife Speed

H - Knife Pressure

3.17.2 Navigating HarvestTouch

C - Header Height

F - Float Settings Icon

J - Header Tilt

Display, page